MG Red Shift 0W-20 4L

Fuel-saving 0W-20 engine oil for modern petrol, diesel and hybrid engines

MG Red Shift 0W-20 4L (SP C5 GF-6A Super Combo) is a fully synthetic engine oil combining carefully selected base oils with a latest-generation additive package. The additives build a durable protective barrier on moving components, giving effective and long-lasting engine protection from the first seconds after start-up.

The SAE 0W-20 viscosity grade is engineered for low-friction operation: it reaches critical components almost immediately on a cold morning and reduces internal drag once the engine is warm. The oil meets API SP, ACEA C5 and ILSAC GF-6A standards, making it compatible with modern emission control systems (DPF/GPF, TWC) and with the requirements of today’s downsized, turbocharged and hybrid powertrains.

Key benefits

• LSPI protection – the API SP / GF-6A formulation guards against low-speed pre-ignition, a damaging phenomenon in modern turbocharged direct-injection petrol engines
• Lower fuel consumption – the low-viscosity formulation cuts internal friction and pumping losses, reducing fuel use and CO₂ emissions
• Built for hybrids – hybrid drivetrains restart the engine constantly and often run it cool; a 0W-20 reaches the bearings fastest and resists the fuel dilution and deposit build-up that come with short running cycles
• Exceptional cold-start performance – a pour point of −45 °C and CCS viscosity of 5900 mPa·s at −35 °C mean reliable lubrication in extreme winter conditions
• Advanced anti-wear protection – the additive package forms a protective barrier on camshafts, cylinder walls and bearings during operation
• Thermal and oxidation stability – a viscosity index of 156 keeps viscosity consistent across the full drain interval
• Engine cleanliness – a TBN of 8.5 mg KOH/g neutralises acidic combustion by-products and limits sludge, varnish and deposits
• Emission system compatibility – reduced ash, sulphur and phosphorus content protects DPF, GPF and catalytic converters
• Turbocharger protection – resists thermal breakdown in the high-temperature zone around the turbo bearing

What makes MG Red Shift 0W-20 4L different

Unlike conventional engine oils, MG Red Shift 0W-20 4L is formulated with an integrated additive package that goes beyond basic lubrication. The active components bond with metal surfaces to form a protective layer that remains effective even during extended drain intervals. This means less metal-to-metal contact, lower operating temperatures and a quieter engine – benefits that become more noticeable with every oil change.

A 0W-20 has to do two things that pull in opposite directions: flow freely enough to save fuel, and still hold a protective film under load. The additive chemistry is what bridges that gap, which is why this grade depends far more on formulation quality than a heavier oil does.

Technical specification

• Product type: Fully synthetic engine oil
• SAE viscosity grade: 0W-20
• API: SP
• ACEA: C5
• ILSAC: GF-6A
• Volume: 4 litres
• Engine type: Petrol, diesel and hybrid (including turbocharged)
• Emission system compatibility: DPF, FAP, GPF, TWC
• Storage: Store in a cool, dry place away from direct sunlight
• Shelf life: 5 years from production date when stored unopened

Typical values

• Kinematic viscosity at 100 °C: 8.5 mm²/s
• Viscosity index: 156
• Total base number (TBN): 8.5 mg KOH/g
• Pour point: −45 °C
• Flash point: 210 °C
• CCS viscosity at −35 °C: 5900 mPa·s
• Appearance: Clear, red

Performance level / OEM approvals

MG Red Shift 0W-20 4L meets or exceeds the following manufacturer specifications:

• Mercedes-Benz: MB 229.71
• GM: dexos1™ Gen 2
• Jaguar Land Rover: STJLR 51.5122
• Ford: WSS-M2C947-A
• Volvo: VCC RBS0-2AE
• Chrysler: MS 6395
• Toyota, Nissan, Suzuki: 0W-20 service fill requirements

Recommended applications

MG Red Shift 0W-20 4L is suitable for petrol, diesel and hybrid engines in passenger cars and light commercial vehicles, including units equipped with:

• direct injection (TSI, TFSI, GDI, D-4S, HDI, TDI)
• turbocharging
• Start-Stop systems and full or mild hybrid drivetrains
• DPF / FAP / GPF particulate filters
• three-way catalytic converters

Important: use this oil only in engines for which the manufacturer specifies a 0W-20 grade. If your service book calls for a heavier oil such as 5W-30 or 5W-40, choose the matching product from the MG Red Shift range instead.

The 4-litre canister is the most popular choice for standard passenger car engines with an oil capacity of 3.5–4.5 litres. MG Red Shift 0W-20 is also available in a 1L bottle for top-ups.

Why drivers choose MG Red Shift 0W-20 4L

The MG Red Shift line is built around three pillars shown on the label: Protection, Lubrication, Performance. This 0W-20 adds a fourth dimension – efficiency – for drivers of modern engines where the manufacturer has moved to a low-viscosity service fill to meet emission targets.

With approvals spanning Mercedes-Benz, GM, Jaguar Land Rover, Ford, Volvo and Chrysler, plus the requirements of leading Japanese manufacturers, a single product covers a wide range of newer vehicles in a mixed household or workshop. Its distinctive clear red colour makes the oil easy to identify on the dipstick and at every top-up.